Danfoss FC 300 Programming Manual page 109

FC 300 Programming Guide
Options for readout output variables:
*
[0]
[45]
[48]
[51]
[100]
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
5-60 Terminal 27 Pulse Output Variable
Option:
[0]
5-62 Pulse Output Maximum Frequency #27
Range:
5000
*
Hz
Parameters for configuring the scaling and output functions of
pulse outputs. The pulse outputs are designated to terminals 27
or 29. Select terminal 27 output in par. 5-01 and terminal 29
output in par. 5-02.
No operation
Bus control
Bus control time-out
MCO controlled
Output frequency
Reference
Feedback
Motor current
Torque relative to lim-
it
Torque relative to rat-
ed
Power
Speed
Torque
Max Out Freq
Function:
No operation Select the variable for viewing on the terminal 27 display.
This parameter cannot be adjusted while the motor is running.
Function:
[0 - 32000 Hz] Set the maximum frequency for terminal 27, corresponding to
the output variable selected in par. 5-60.
This parameter cannot be adjusted while the motor is running.
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
2. How to Programme
109
2