Danfoss FC 300 Programming Manual page 37

FC 300 Programming Guide
2.3.5. LCP Custom Readout, Par. 0-3*
It is possible to customize the display elements for various purposes: *Custom Readout. Value
proportional to speed (Linear, squared or cubed depending on unit selected in par. 0-30
Readout Unit
Custom Readout
The calculated value to be displayed is based on settings in par. 0-30,
Custom Readout Min Value
0-31
4-13/4-14,
The relation will depend on the type of unit selected in par.0-30, Custom Readout Unit:
Unit Type
Dimensionless
Speed
Flow, volume
Flow, mass
Velocity
Length
Temperature
Pressure
Power
0-30 Custom Readout Unit
Option:
*
[0]
) *Display Text. Text string stored in a parameter.
, (linear only), par. 0-32,
Motor Speed High Limit
and actual speed.
Function:
It is possible to program a value to be shown in the display of
the LCP. The value will have a linear, squared or cubed relation
to speed. This relation will depend on the unit selected (see ta-
ble above). The actual calculated value can be read in
Readout
Custom Readout [16-09] in par. 0-20 – 0-24, Display Line X.X
Small (large).
Dimensionless:
None
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
Custom Readout Unit
Custom Readout Max Value
Speed Relation
Linear
Quadratic
Cubic
, par. 16-09, and/or shown in the display be selecting
2. How to Programme
Custom
, par.
, par.
Custom
37
2