Danfoss FC 300 Programming Manual page 187

FC 300 Programming Guide
15-31 Fault Log: Value
Array [10]
*
0
15-32 Fault Log: Time
Array [10]
*
0
2.16.6. Drive Identification, 15-4*
Parameters containing read only information about the hardware and software configuration of
the frequency converter.
15-40 FC Type
Option:
15-41 Power Section
Option:
15-42 Voltage
Option:
15-43 Software Version
Option:
15-44 Ordered Typecode String
Option:
[-32767 - 32767] View an extra description of the error. This parameter is mostly
used in combination with alarm 38 'internal fault'.
[0 - 2147483647] View the time when the logged event occurred. Time is meas-
ured in seconds from frequency converter start-up.
Function:
View the FC type. The read-out is identical to the FC 300 Series
power field of the type code definition, characters 1-6.
Function:
View the FC type. The read-out is identical to the FC 300 Series
power field of the type code definition, characters 7-10.
Function:
View the FC type. The read-out is identical to the FC 300 Series
power field of the type code definition, characters 11-12.
Function:
View the combined SW version (or 'package version') consisting
of power SW and control SW.
Function:
View the type code string used for re-ordering the frequency
converter in its original configuration.
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
2. How to Programme
187
2