Danfoss FC 300 Programming Manual page 41

FC 300 Programming Guide
0-51 Set-up Copy
Option:
*
[0]
[1]
[2]
[3]
[4]
[9]
2.3.8. 0-6* Password
Define password access to menus.
0-60 Main Menu Password
Option:
[100]
0-61 Access to Main Menu w/o Password
Option:
*
[0]
[1]
[2]
[3]
[4]
[5]
[6]
Full access
If
0-60, 0-65 and 0-66 will be ignored.
0-65 Quick Menu Password
Range:
*
200
Function:
No copy No function
Copy to set-up 1 Copies all parameters in the present edit set-up (defined in par.
0-11
Copy to set-up 2 Copies all parameters in the present edit set-up (defined in par.
0-11
Copy to set-up 3 Copies all parameters in the present edit set-up (defined in par.
0-11
Copy to set-up 4 Copies all parameters in the present edit set-up (defined in par.
0-11
Copy to all Copies the parameters in the present set-up over to each of the
set-ups 1 to 4.
Function:
*
-9999 - 9999 Define the password for access to the Main Menu via the [Main
Menu] key. If par. 0-61
set to
Function:
Full access Disables password defined in par. 0-60
Read only Prevent unauthorized editing of Main Menu parameters.
No access Prevent unauthorized viewing and editing of Main Menu param-
eters.
Bus: Read only Read only functions for parameters on fieldbus and/ or FC
standard bus.
Bus: No access No access to parameters is allowed via fieldbus and/ or FC
standard bus.
All: Read only Read only function for parameters on LCP, fieldbus or FC stand-
ard bus.
All: No access No access from LCP, fieldbus or FC standard bus is allowed.
[0] is selected then parameters
Function:
[-9999 - 9999] Define the password for access to the Quick Menu via the [Quick
Menu] key. If par. 0-66
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
Edit Set-up
) to Set-up 1.
Edit Set-up
) to Set-up 2.
Edit Set-up
) to Set-up 3.
Edit Set-up
) to Set-up 4.
Access to Main Menu w/o Password
Full access
[0], this parameter will be ignored.
Access to Quick Menu w/o Password
2. How to Programme
is
Main Menu Password
.
is
41
2