Danfoss FC 300 Programming Manual page 141

FC 300 Programming Guide
Bit:
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
9-63 Actual Baud Rate
Option:
[0]
[1]
[2]
[3]
[4]
[6]
[7]
[8]
[9]
[10]
[11]
[255]
9-64 Device Identification
Range:
*
0
9-65 Profile Number
Range:
*
0
Meaning:
Connection with DP-master is not
Not used
FDL (Field-bus Data link Layer) is not ok
Clear data command received
Actual value is not updated
Baudrate search
PROFIBUS ASIC is not transmitting
Initializing of PROFIBUS is not ok
Drive is tripped
Internal CAN error
Wrong configuration data from PLC
Wrong ID sent by PLC
Internal error occured
Not configured
Timeout active
Warning 34 active
Function:
This parameter displays the actual Profibus baud rate. The Pro-
fibus Master automatically sets the baud rate.
Read only
9.6 kbit/s
19.2 kbit/s
93.75 kbit/s
187.5 kbit/s
500 kbit/s
1500 kbit/s
3000 kbit/s
6000 kbit/s
12000 kbit/s
31.25 kbit/s
45.45 kbit/s
No baud rate found
Function:
[0 - 0] This parameter displays the device identification. Please refer to
Operating Instructions for Profibus,
the
explanation.
Function:
Read only
[0 - 0] This parameter contains the profile identification. Byte 1 con-
tains the profile number and byte 2 the version number of the
profile.
NB!
This parameter is not visible via LCP.
®
MG.33.M2.02 - VLT is a registered Danfoss trademark
2. How to Programme
MG33CXYY for further
141
2