Teletek electronics CA62 Installation And Programming Manual page 39

ADDReSS 3018 - PGM 1 DeVICe ID (Keyboards)
At this address a number of a keyboard from 1 to 4 for PGM1 extension attribute 18 assigned to AD-
PGM 1 DRESS 3013.
Device ID To activate the parameter press the digit button with the corresponding number. The next pressing of
the same digit button will deactivate the parameter.
ADDReSS 3019 - PGM 1 DeVICe ID (Keyboards / Proxi Readers)
At this address a proximity reader number from 1 to 2 for PGM1 extensions attributes 18 and 19 as-
PGM 1 signed to ADDRESS 3013.
Device ID To activate the parameter press the digit button with the corresponding number. The next pressing of
the same digit button will deactivate the parameter.
ADDReSSeS 3020 ... 3029 - PRoGRAMMING oF PGM 2
The programming is the same as at ADDRESSES from 3010 to 3019, as here are assigned the attributes (1 and 2),
attachment, extensions (00 - 19 and Х1 - Х4) and ID number for PGM2.
Default settings - Attributes 1 - ALARM; Attributes 2 - POLARITY, Attachment - PARTITION A
ADDReSSeS 3030 ... 3039 - PRoGRAMMING oF PGM 3
The programming is the same as at ADDRESSES from 3010 to 3019, as here are assigned the attributes (1 and 2),
attachment, extensions (00 - 19 and Х1 - Х4) and ID number for PGM3.
Default settings - Attributes 1 - ALARM; Attributes 2 - POLARITY, Attachment - PARTITION A
ADDReSSeS 3040 ... 3049 - PRoGRAMMING oF SIReN oUtPUt (PGM 4)
The programming is the same as at ADDRESSES from 3010 to 3019, as here are assigned the attributes (1 and 2),
attachment, extensions (00 - 19 and Х1 - Х4) and ID number for PGM4.
By default the SIREN output is indended for siren connection with assigned SIREN attribute at ADDRESS
3041.
Default settings - Attributes 2 - POLARITY and SIREN, Attributes - PARTITION A
Installation and Programming Manual - СА62 Alarm Control Panel
39