Absolute Value Input Of Knife Compensation; Increment Input Of Knife Compensation; Automatic Operation; Automatic Running - Adtech ADT-CNC4220 User Manual

7.4.1 ABSOLUTE VALUE INPUT OF KNIFE COMPENSATION

1. Enter the bias interface, move the cursor to the compensation number to edit the bias value and
press the MDI
1 Press the address key
2 Press the
For example: Input -20 in the X value of bias number T0202, and the operation follows:
In the MDI mode, type X-20 and then press the

7.4.2 INCREMENT INPUT OF KNIFE COMPENSATION

1. Enter the bias interface, move the cursor to the compensation number to edit the bias value
and press the MDI
2. Press the address key
point)
3. Press the

8.1 Automatic running

Select the program with searching or scanning method
 Searching (take searching program O0001 as an example)
A. Select the Auto mode;
B. Press the Program
C. Press the address key
D. Press the
the program doesn't exist).
key to enter the MDI mode;
or
key to display the compensation on the LCD.
Knife compensation parameters
S/N
Data
Position:
key to enter the MDI mode;
or
key to display the increased value of the increment.

8. Automatic operation

key to enter the program page;
key to display the searched programs on the LCD (the system alarms if
CNC 4 2 2 0 M a c hi ne Too l Op e ra t ion an d Te st
, and then input the compensation value (allows radix point)
key to have the following page:
Fixed knife alignment
, and then input the compensation value (allows radix
and number keys 0, 0, 0, 1 in sequence;
MDI mode
41