Honeywell Genesis Touch User Manual page 89

Genesis Touch software upgrades are validated by Life Care Solutions before
release, but are NOT automatically installed in order to allow healthcare providers
to prepare for an upgrade. A push-button installation method allows users to
upgrade to the most recent version of software. When an upgrade is complete, any
peripherals remain paired.
It is recommended to check for monitoring software upgrades. Upgrade instruc-
tions are subject to change depending on your monitor's serial number and
whether or not an Android Operating System upgrade is also required. You may
check for the latest Upgrade Instructions at this site:
www.honeywelllifecare.com/genesistouchhelp/
To start a Genesis Touch software update, from the General Settings menu:
1. Select Download:
2. A screen similar to the following appears:
3. Select Download again. If there are currently no updates for the monitor, a
4. If a download is available, a status bar will begin to indicate the download
5. In the Genesis Touch installation window that appears, select All and tap
6. If a popup appears asking if you would like to regularly check device activity for
7. When a Genesis Touch App Installed message appears, select Open.
8. Genesis Touch will always download the latest software available at the time.
Note: Always check the online upgrade Instructions for any additional recommendations.
Genesis Touch - User Manual
screen similar to the following appears:
progress. A popup window appears on the monitor when the installation
process is ready to begin. Follow all directions in the upgrade instructions to
continue with your installation.
Install to continue.
security problems, select Decline to continue.
Check the About screen to verify your new software version.
.
http://
81