Pairing An A&D Uc-321Pbt Scale - Honeywell Genesis Touch User Manual

Pairing an A&D UC-321PBT Scale
1. Insert four AA batteries into the scale.
2. Set the switch on the bottom of the scale to WEIGHT B (second from left for kg,
3. To add a peripheral device, select the Add button (
4. Select Scale in the menu that appears.
5. In the Scale menu, select Device. The Device button is highlighted:
6. Select the No Device Paired check box.
7. Select the A&D scale type from the menu that appears and tap OK:
8. In the Scale menu, select Start Pairing:
9. Select Yes, in the Bluetooth Permission Request window that appears:
22
as shown below). Refer to the manufacturer's document that came with your
scale for more detailed information.
).
Genesis Touch - User Manual