Honeywell Genesis Touch User Manual page 43

1. To get started, determine if your H3 System adapter looks like either of the pic-
2. Turn the unit over and open the cover on the back to insert batteries.
3. After inserting the batteries, turn the unit over
4. From the Peripherals menu on the Genesis Touch, select the Add button
5. Select Glucometer from the list:
Genesis Touch - User Manual
tures below. If it is black, it interacts with Bayer Glucometers. If it is blue, it inter-
acts with Johnson &Johnson (J&J) Glucometers.
This compatibility is also stamped on the back of the glucometer adapter on the
bottom right of the label:
An example of a Bayer H3 Glucometer Adapter
and you will notice a blinking red light that
confirms the unit is receiving power, as shown
on the right.
Batteries should be changed approximately
every three months according to the device
manufacturer. If the red light on your H3
adapter is flashing continuously, change the
batteries. It is recommended to use fresh
batteries whenever the adapter is paired, or
after it been in storage with the batteries still in the unit.
.
37