Honeywell Genesis Touch User Manual page 29

10. Messages similar to the following appear:
11. Power on the A&D scale by pressing the Measurement Switch button (blue/
12. Step on the scale.
13. Watch the messages on the screen. Select Yes, if you are asked to approve a
14. Press the Back button. The Scale screen appears showing the scale that has
15. Press the Back button. The Peripherals screen appears showing the Bluetooth
Genesis Touch - User Manual
gray power button on the front side of the A&D scale). The display window on
the scale should zero.
pairing request. When the scale is paired, messages similar to the following
appear on the screen ending with "Pairing Succeeded!"
been paired:
identifier of the scale that has been paired:
23