Honeywell Genesis Touch User Manual page 44

6. At the Glucometer menu, select Device. The Device button is highlighted:
7. With your H3 Adapter in front of you,
8. Wait 5 seconds and tap the No Device Paired box on the Genesis Touch.
9. You will see a spinning circle as the monitor looks for an adapter, and
10. Tap the empty box to pair the device, and you will see the following screen when
38
hold down the Red button on the front
of the adapter for 5 seconds.
You will see a red light turn on. If the red
light does not remain lit and continues
flashing, you may not be able to pair.
Change the batteries.
when found, you will see the line item below. Remember to press the
Scan button if you need more time to search for the adapter:
complete. Press the Back button to return to the Peripherals menu.
Genesis Touch - User Manual