Table of Contents
Advertisement
The web pages contain the following panels:
Device Info Panel
The Device Info panel (see figure 30,
device description, part number, and an Extron link to the Extron website.
Input Panel
The Input panel (
its HDCP status.
The following HDCP status indicators may be displayed for the connected input:
Symbol
No Signal
Roles and Permissions Panel
In the Roles and Permissions panel (see figure 30,
remove administrator and user passwords. The web password is administrator level.
Setting a password
NOTES:
•
The initial factory configured passwords for all accounts on this device have
been set to the device serial number. Passwords are case sensitive. In the
event of an absolute system reset, the administrator passwords are reset to
extron.
The following rules apply to passwords:
•
•
•
•
•
•
•
To assign new administrator and user passwords:
In the Roles and Permissions panel, click Edit. The Role and Permission
1.
Settings dialog box opens.
In the Admin panel, enter the new administrator password in the Admin Password field
2.
(see figure 31,
The password appears as four dots unless you select Show Password.
1
) displays the name and signal type of the active input signal as well as
2
Definition
The signal is HDCP encrypted.
The signal is not encrypted.
There is no signal detected.
Length is 1-128 characters.
Passwords are case-sensitive.
All human-readable characters are permitted except | .
To remove a user password, set it to a single space.
The administrator password cannot be removed. There must always
be an administrator password in place. If you enter a single space as
the administrator password, the password defaults to extron.
When an administrator password is reset to the default via an absolute
system reset, the user password is removed (set to no password).
on the next page).
1
DSC 401 and DSC 401 A User Guide • Internal Web Page
on the previous page) contains the model name,
on page 77) you can set and
3
78
Advertisement
Table of Contents
