Fig. 6-53: Gaps Between Pads And Boom - Rear Of 4-Section Boom; Fig. 6-54: Clearances Between Boom Sections - Front Of 4-Section Boom - JLG Lull 1044C-54 II Series Service Manual

Boom and Transfer
6-52
0.02"–0.08"
(1/64"–5/64")
0.03"–0.09"
(1/32"–3/32")
0.03"–0.09"
(1/32"–3/32")
Fig. 6-53: Gaps Between Pads and Boom – Rear of 4-Section Boom
10. (Ref. Fig. 6-53) Install/remove shim(s) under indicated pads to obtain
specified clearances making sure clearances on both sides of each
boom section are the same.
0.47–0.53"
0.72"–0.78"
(15/32"–
(23/32"–
17/32")
25/32")
Fig. 6-54: Clearances Between Boom Sections – Front of 4-Section Boom
Rear of Boom, Looking Forward
0.595"–0.655"
(19/32"–
21/32")
Front of Boom, Looking Rearward
0.02"–0.08"
(1/64"–5/64")
0.03"–0.09"
(1/32"–3/32")
0.03"–0.09"
(1/32"–3/32")
0.47–0.53"
0.72"–0.78"
(15/32"–
(23/32"–
17/32")
25/32")
31200079