Fig. 6-85: Slide Pads - Middle (Rear) Boom Section - JLG Lull 1044C-54 II Series Service Manual

31200079
1 2
# Description
1 Front Side Slide Pad
2 Shim
3 Lockwasher
4 Button-Head Socket Capscrew
5 Button-Head Socket Capscrew
6 Lockwasher
Fig. 6-85: Slide Pads – Middle (Rear) Boom Section
36. (Ref. Fig. 6-85) Remove remaining slide pads from middle (rear) boom
section as follows:
a. Remove eight (8) each capscrews (Item 4) and lockwashers
(Item 3) securing side slide pads to front of middle (rear) boom
section. Remove four (4) slide pads (Item 1) and shims (Item 2).
b. Remove four (4) each capscrews (Item 7) and lockwashers
(Item 8) securing side slide pads to rear of middle (rear) boom
section. Remove two (2) slide pads (Item 10) and shims (Item 9).
c. Remove four (4) each capscrews (Item 5) and lockwashers
(Item 6) securing lower slide pads to rear of middle (rear) boom
section. Remove two (2) slide pads (Item 12) and shims (Item 11).
3
4
#
7 Button-Head Socket Capscrew
8 Lockwasher
9 Shim
10 Rear Side Slide Pad
11 Shim
12 Rear Lower Slide Pad
Boom and Transfer
7
8
9
10
11
6
12
5
Description
6-79