Boom and Transfer
Removal
Quick Attach
6-44
1. Disconnect attachment from quick attach.
2. Fully retract boom and transfer carriage (if equipped), level quick
attach and lower boom to ground.
3. Set park brake, lock shift selector in NEUTRAL position, shut off
engine and remove ignition key from switch. Block all wheels.
1
#
Description
1 Quick Attach
2 Pivot Pin
3 capscrew
Fig. 6-40: Lower Pivot of Carriage Tilt Cylinder
4. (Ref. Fig. 6-40) Remove capscrew (Item 3), lockwasher (Item 4), and
lock pin (Item 5) from lower pivot pin (Item 2) of front carriage tilt
cylinder (Item 6). Remove pivot pin from quick attach (Item 1).
6
5
4
3
2
#
Description
4 Lockwasher
5 Lock Pin
6 Front Carriage Tilt Cylinder
J1067
31200079