Fig. 6-88: Side Slide Pads - Outer Boom Section - JLG Lull 1044C-54 II Series Service Manual

Boom and Transfer
6-82
a. Remove two (2) each nuts (Item 7), lockwashers (Item 8), and tube
clamps (Item 9) securing each set of auxiliary and carriage tilt
hydraulic tubes (Items 5 and 6) to bottom of middle (rear) boom
section.
b. Loosen screw on cushion clamps (Item 10). Slide cushion clamps
out of channel and remove hydraulic tubes from boom section.
1
3
4
# Description
1 Button-Head Socket Capscrew
2 Lockwasher
Fig. 6-88: Side Slide Pads – Outer Boom Section
41. (Ref. Fig. 6-88) Remove side slide pads from outer boom section as
follows:
a. Remove four (4) capscrews (Item 1) and lockwashers (Item 2)
securing side slide pads to outer boom.
b. Remove the two (2) slide pads (Item 4) and shims (Item 3).
2
#
3 Shim
4 Side Slide Pad
Description
31200079