Drive Shaft Maintenance; Driveshaft Removal - JLG Lull 1044C-54 II Series Service Manual

Axles and Brakes

Drive Shaft Maintenance

DriveShaft Removal

9-8
1
11
# Description
1 Universal Joint Kit
2 Bearing Strap
3 Strap Bolt
4 Driveshaft
5 Transmission
6 Rear Driveshaft
Refer to the appropriate Operator/Safety Manual for information regarding
the lubrication of the grease fittings on the drive shafts.
Important: To help ensure optimum performance, the drive shaft assemblies are
specially balanced as a unit at the factory. When servicing any flange
yoke, slip yoke or drive shaft tube, order a complete assembly if
components are bent or damaged. Refer to the appropriate parts manual
for ordering information.
Note: The drive shaft assemblies are balanced assemblies. Mark the yoke and
axle, transmission, transfer case, and the shaft and slip yoke so that these
components can be returned to their original positions when reinstalled.
Yokes at both ends of the drive shaft must be in the same plane to help
prevent excessive vibration.
7
2
3
4
8
9
6
7
9
10
#
7 Universal Joint Kit
8 Hex Head Capscrew
9 Flat Washer
10 Locknut
11 Front Driveshaft
5
MV0370
Description
31200079