Fig. 6-101: Slide Pad Installation - Inner Boom Section; Fig. 6-102: Grease Hose Installation - JLG Lull 1044C-54 II Series Service Manual

Boom and Transfer
6-96
c. Install auxiliary and front carriage tilt hydraulic tubes on channels
(Item 6) in inside of inner boom section with cushion clamps
(Item 3) as described in Substep d under Step 2 on page 6-68.
24. Install front carriage tilt cylinder in inner boom (See page 6-20).
25. Install auxiliary hydraulic quick disconnects
# Description
1 Lower Slide Pad
2 Side Slide Pad
Fig. 6-101: Slide Pad Installation – Inner Boom Section
26. (Ref. Fig. 6-101) After applying thread locking compound to the
capscrews, install two (2) lower and two (2) side slide pads (Items 1
and 2) on inner boom section according to drawing specifications with
lockwashers (Item 3) and capscrews (Item 4). Torque capscrews to
180 in-lbs.
# Description
1 Grease Hose
2 Inner Boom Section
3 Elbow

Fig. 6-102: Grease Hose Installation

# Description
3 Lockwasher
4 Button-Head Socket Capscrew
6
1
5
4
3
2
# Description
4 Bulkhead Adapter
5 Grease Fitting
6 Grease Fitting Cover
3
4
4
3
2
1
31200079