Installation; Fig. 6-41: Quick Attach Pivot - JLG Lull 1044C-54 II Series Service Manual

Installation

Quick Attach
31200079
1
# Description
1 Pivot Pin
2 Capscrew
3 Lockwasher
5. (Ref. Fig. 6-41) Remove nut (Item 4), lockwasher (Item 3), and
capscrew (Item 2) from quick attach pivot pin (Item 1).
6. Remove quick attach pivot pin and shims (Item 5) (if installed).
7. Clean and inspect all parts for condition and wear. Replace as
necessary.
1. Align quick attach (Item 6) to boom. Check gaps between quick attach
and boom. Select shims to center quick attach on boom.
2. (Ref. Fig. 6-41) Install quick attach pivot pin (Item 1) and shims
(Item 5). Secure pivot pin with capscrew (Item 2), lockwasher (Item 3),
and nut (Item 4).
3. (Ref. Fig. 6-40) Align rod-end of front carriage tilt cylinder with quick
attach. Install pivot pin and secure with lock pin, lockwasher, and
capscrew.
4. Lubricate grease fittings with EP lithium based grease.
5
3
4
2
#
4 Nut
5 Shim
6 Quick Attach

Fig. 6-41: Quick Attach Pivot

Boom and Transfer
5
6
Description
J1068
6-45