Fig. 6-65: Locations For Chain Attachment - Inner Boom Section - JLG Lull 1044C-54 II Series Service Manual

Boom and Transfer
6-60
17. (Ref. Fig. 6-64) Remove upper rear slide pads from inner boom section
as follows:
a. Remove two (2) each capscrews (Item 6), lockwashers (Item 5),
flatwashers (Item 4), and pad retainers (Item 3) from rear of inner
boom section.
b. Remove four (4) capscrews (Item 8) and lockwashers (Item 7)
securing upper slide pads (Item 2) to rear of inner boom section.
Remove the two (2) slide pads.
Locations for
Chain Attachment
Fig. 6-65: Locations for Chain Attachment – Inner Boom Section
18. (Ref. Fig. 6-65) Because the chain and hose guide assembly interferes
with removal of the boom pivot pins, it will be necessary to extend the
boom approximately eight (8) inches. To do so, attach a chain to one of
the openings either on the front or top of the inner boom section and
pull the sections straight out.
31200079