Boom and Transfer
Quick Attach
Description
Disconnecting an Attachment
6-40
Fig. 6-30: Quick Attach Rear View
(Ref. Fig. 6-30) The quick attach is designed for easy connection and
disconnection of various attachments. By pulling the release handle,
attachments can be easily interchanged.
1. Come to a complete stop on flat, level ground.
2. Set the park brake.
3. Raise the boom so attachment clears the ground.
4. Extend the boom a short distance.
5. Lower the boom to rest the attachment on level ground.
6. Shut off engine.
7. Disconnect attachment hydraulic lines (if equipped).
Fig. 6-31: Release Handle
J1004
J1014
31200079