Fig. 5-4: Hydraulic Reservoir - JLG Lull 1044C-54 II Series Service Manual

31200079
3
2
1
# Description
1 Hydraulic Tank Breather (Models
with Mid-Inlet Hydraulics)
2 Hydraulic Tank Sight Gauge
3 Pressure Gauge
4 Return Filter Assembly
(Ref. Fig. 5-4) The hydraulic system return filter assembly (Item 4), along
with the pressure gauge (Item 3), is located within the return filter housing,
located at the top of the reservoir (Item 5).
The strainer (Item 6) and suction line (Item 7) are located at the bottom of
the back side of the reservoir.
A pressure differential gauge (Item 3) is fitted to the return filter housing to
monitor filter condition.
A breather filter assembly (Item 1) is threaded into the top of the reservoir. It
allows for expansion of fluid and prevents vacuum in the tank.
Check the hydraulic reservoir daily for the proper oil level. Maintain oil level
at the full mark on the sight gauge (Item 2) with all cylinders retracted.
Important: Do not operate the machine if the oil level falls below the low mark on
the sight gauge. Low oil level could damage the pump and other
components.
Supply, Pressure, and Return Hydraulics
4
5
6
#
5 Hydraulic Oil Tank
6 Hydraulic Oil Strainer (Models with
Mid-Inlet Hydraulics)
7 Suction Line

Fig. 5-4: Hydraulic Reservoir

7
MV0010
Description
5-7