Fig. 5-35: Roll-Back Tray Installation - Mid-Inlet Hydraulics - JLG Lull 1044C-54 II Series Service Manual

Supply, Pressure, and Return Hydraulics
Mid-Inlet Hydraulic System
5-52
6
7
5
4
2
1
# Description
1 Nut
2 Lockwasher
3 Front Hose Tray Support Bracket
4 Hose Mount
5 Button Head Socket Capscrew
6 Button Head Socket Capscrew

Fig. 5-35: Roll-Back Tray Installation - Mid-Inlet Hydraulics

(Ref. Fig. 5-35) The following procedure describes removal of the roll-back
hose tray used in models with a mid-inlet hydraulic system.
1. Remove the two (2) each button head socket capscrews (Item 6) and
lockwashers (Item 7) securing the roll-back hose tray (Item 8) to the
front hose tray support bracket (Item 3).
2. Remove the two (2) each button head socket capscrews (Item 9),
lockwashers (Item 10), and flatwashers (Item 11) securing the roll-
back hose tray to the rear hose tray support bracket (Item 12).
3. Remove the roll-back hose tray from the machine.
8
3
#
7 Lockwasher
8 Roll-Back Hose Tray
9 Button Head Socket Capscrew
10 Lockwasher
11 Flatwasher
12 Rear Hose Tray Support Bracket
9
10
11
12
Description
31200079