Boom Extend Lockout Valve
Description
Hydraulic Diagnostic Ports
General
31200079
Fig. 5-32: Boom Extend Lockout Valve
(Ref. Fig. 5-32) The boom extend lockout valve is used on models with
outriggers and is standard equipment on 1044C-54 models. It is located on
top of the rear axle stabilizer control valve.
The eight (8) hydraulic diagnostic ports are located beneath the operator's
compartment and can be accessed through the opening in the operator's
step.
PUMP 1
Fig. 5-33: Hydraulic Diagnostic Ports - Models with Mid-Inlet Hydraulics
(Ref. Fig. 5-33) The hydraulic ports on models with mid-inlet hydraulics
are:
Supply, Pressure, and Return Hydraulics
REAR OSC.
REAR OSC.
PUMP 2
LOCK (G1)
LOCK (G2)
BRAKES
STEERING
C
D
SV1
PD1
OR3
Front View
PILOT
ACCUM.
5-49