Fig. 6-78: Slide Pad Removal - Middle (Forward) Boom Section - JLG Lull 1044C-54 II Series Service Manual

31200079
1
2
3
4
5
10
6
9
7
# Description
1 Front Bottom Slide Pad
2 Shim
3 Pad Retainer
4 Flatwasher
5 Lockwasher
6 Capscrew
7 Side Slide Pad
8 Shim
9 Button-Head Socket Capscrew
10 Lockwasher
Fig. 6-78: Slide Pad Removal – Middle (Forward) Boom Section
20. (Ref. Fig. 6-78) Remove remaining slide pads from middle (forward)
boom section as follows:
a. Remove four (4) capscrews (Item 11) and lockwashers (Item 12)
securing two (2) side slide pads (Item 7) to front of middle (forward)
boom section (Item 13). Remove slide pads and shims (Item 8).
Repeat this step for the rear side slide pads.
b. (Ref. Fig. 6-78) Remove two (2) each capscrews (Item 6),
lockwashers (Item 5), flatwashers (Item 4), and pad retainers
(Item 3) from front of middle (forward) boom section.
13
12
11
8
#
11 Button-Head Socket Capscrew
12 Lockwasher
13 Middle (Forward) Boom Assy
14 Button-Head Socket Capscrew
15 Lockwasher
16 Shim
17 Rear Bottom Slide Pad
18 Pad Retainer
Boom and Transfer
11 12
14
15
9
7
16
17
MV0090
Description
6-73