As-I 3.0 Gateway Profinet Via Profisafe - Pepperl+Fuchs VBG-PN-K30-DMD-S16-EV Manual

AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
General
The AS-i 3.0 PROFINET Gateway with integr. Safety Monitor combines two de-
vices in one housing: an AS-i/PROFINET Gateway and a Safety Monitor for 2 AS-
i circuits.
The safety unit provides 4 inputs which can be defined as either EDM or as
START inputs.
AS-i/PROFINET-Gateways serve to connect AS-i systems to the superordinate
PROFINET controller. It acts as a master for AS-i and as a slave on field bus lev-
el.
Commissioning, debugging and setting up of the AS-i parameters can be accom-
plished with the use of the display, but it can also be handled via the diagnostic in-
terface and the field bus.
4.1.2

AS-i 3.0 Gateway PROFINET via PROFIsafe

VBG-PNS-K30-DMD
The AS-i 3.0 Gateway PROFINET via PROFIsafe is a combination of an AS-i/
PROFINET Gateway with a PROFIsafe F-device. It is used for transmitting of
safety related data to/from SaW slaves via the standard field bus PROFINET.
The gateway supports 64 release circuits. The integrated safety unit provides 4
non-safety inputs. PROFIsafe transfers input status data to F-Host.
Information!
PROFIsafe is a certified acc. to IEC 61508 profile for PROFIBUS and PROFINET. With
SIL 3 (Safety Integrity Level) or category 4 acc. to EN 954-1 fulfills PROFIsafe the
highest safety requirements for the process- and manufacturing industry. Both safety
related and standard communication are possible via one and the same cable.
AS-i/PROFINET-Gateways serve to connect AS-i systems to the superordinate
PROFINET controller. It acts as a master for AS-i and as a slave on field bus lev-
el.
12
4 release
circuits;
PROFI-
max. 2 x relay,
safe,
62 x 2 x fast
PROFI-
2 channels electronic
NET
safe out-
puts
2 AS-i
PROFI net-
max.
safe works,
16
(F-CPU) 2 AS-i
Masters
Tab. 4-2. Funcion range "AS-i 3.0 Gateway PROFINET via PROFIsafe"
no, max.
8A/AS-i
network,
RS 232 +
no
redun- Ethernet
dant sup-
ply