Byte Command Interface; Executing Of Command Interface Commands - Pepperl+Fuchs VBG-PN-K30-DMD-S16-EV Manual

AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
Configuration of AS-i/PROFINET Gateways
13.2.9

12 byte command interface

Modul: 12 bytes Cmd If
Module ident number
Name
Details
Category
Submodule:
Submodule ident number
Cycl input data
Name
Command echo
Execution status
Response data
Cycl. output data
Name
Command
AS-i circuit
Request data
Information!
For information about the structure and the description of the command interface, refer
to the manual "AS-i 3.0 Command Interface".
13.3

Executing of command interface commands

The command interface cann be accessed via the slot 0, subslot 1, data set 7FFF
with "date set read/write". The command interface command is executed when
the data set is written. The result can be read in the same data set. This com-
mand interface has the same structure as those in the process data.
94
0x80000002
12 bytes Cmd If
12 bytes command interface
command interface
0x00000001
data type display as bits
unsigned8
unsigned8
OctetString
data type display as bits
unsigned8
unsigned8
OctetString
length (bytes)
10
length (bytes)
10
Tab. 13-26.