New Generation Of As-I Gateways With Ethernet Diagnostics Interface - Pepperl+Fuchs VBG-PN-K30-DMD-S16-EV Manual

AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
General
Commissioning, debugging and setting up of the AS-i parameters can be accom-
plished with the use of the display, but it can also be handled via the diagnostic in-
terface and the field bus.
4.2

New Generation of AS-i Gateways with ethernet diagnostics interface

The plus points of the new Gateway generation at a glance:
• Gateways now programmable in C
• Ethernet diagnostics interface for remote diagnostics
• Integrated web server: diagnostics for the Gateways and the AS-i circuits
over Ethernet possible with no additional software
• GSD configuration files already stored in the web server
• Earth fault monitor distinguishes between AS-i cable and sensor cable
• Current from both AS-i circuits in the "1 Gateway, 1 power supply for 2 AS-i
circuits" version can now be read directly on the unit
• Self-resetting fuses in the "1 Gateway, 1 power supply for 2 AS-i circuits" ver-
sion
• Device temperature display
• AS-i Power24V capable
• Interfaces for virtually every bus system and Ethernet solution
Information!
See also section <Functions of the new generation of AS-i Gateways> for further infor-
mation.
13