Diagnostics Of Release Circuits 1-4 Via The Binary Data; Switch-Off History - Pepperl+Fuchs VBG-PN-K30-DMD-S16-EV Manual

AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
Function and startup of the Safety Monitor
• Fieldbus interface
10.4.1

Diagnostics of release circuits 1-4 via the binary data

If monitor slaves with base address +1 and +2 exist, the state of several OSSDs
is transmitted there.
Monitor base address+1 assignment
Data bit
D0
D1
D2
D3
Monitor base address+2 assignment
Data bit
D0
D1
D2
D3
10.5

Switch-off history

The switch-off history, accessible from the menu DIAGNOSTICS->INT MONI-
TOR->LAST DIAGNOSTIC, is intended to make reconstruction of the reason for
switch-off easier for the user. The states of all safety-relevant AS-i slaves and all
devices at the time the state change on the output device (change from green to
another color) are stored.
Information!
Available only with AS-i/PROFINET Gateways.
1
Content
State of output circuit 1
State of message output 1
State of output circuit 2
State of message output 2
Content
State of output circuit 3
State of message output 3
State of output circuit 4
State of message output 4
65