Transient Protection - Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual

ID50 Series Panel - Installation, Commissioning & Configuration Manual
997-263-000-11, Issue 11
January 2010
d. DO NOT locate the panel where it is exposed to high
levels of moisture.
e. DO NOT locate the panel where there are high levels
of vibration or shock.
f. DO NOT site the panel where there would be restricted
access to the internal equipment and cabling/wiring
connections.

2.3 Transient Protection

This equipment contains transient-protection devices.
Although no system is completely immune from lightning
transients and interference, for these devices to function
correctly, and to reduce susceptibility, this equipment
must be earthed correctly.
As with all solid state devices, this system may operate
erratically or can be damaged if subjected to lightning-
induced transients.
The use of overhead or outside aerial wiring is not
recommended due to the increased susceptibility to
nearby lightning strikes.
8