Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 60

ID50 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2 8
6
2
6
997-263-000-11, Issue 11
January 2010
5.5.4.5 Suspend Comms Limit
This function is only selectable if Third Party was selected
at the RS485 Protocol screen. A time for suspending the
RS485 Third Party Datalink of up to 300 minutes can be
set. Alternatively, a value of '0' can be entered when an
indefinite period is required.
1 From the Peripheral Options screen, press the '
button on the numeric keypad to select the RS485
Communications port option. The RS485 Protocol
setup screen is displayed:
[Setup] RS485 Protocol =
> : Change
2 Press the ' /
2 8
menu until the Suspend Comms Limit screen is
displayed.
[Setup] Suspend Comms Limit =
> : Change
3 Press the ' ' button if the limit is to be changed.
6
[Setup] Suspend Comms Limit =
Enter new value 60
4 Using the numeric keypad, enter the new value (in
minutes) and confirm using the '
automatically returns to the Suspend Comms Limit
screen. Alternatively, press '
5.5.4.6 RS232 Protocol
This option enables the protocol of the RS232 port to be
configured for use with either driver:
a. External printer (default selection).
b. Third party equipment
c. GSM Modem.
1 From the Peripheral Options screen, press the '
button on the numeric keypad to select the RS232
Communications port option. The RS232 Protocol
setup screen is displayed:
[Setup] RS232 Protocol =
> : Change
2 Press the ' ' button to toggle between 'PRINTER',
6
'THIRD PARTY' or 'GSM MODEM'.
[Setup] RS232 Protocol =
> : Change
[Setup] RS232 Protocol =
> : Change
3 Press ' ' to return to the Peripheral Options menu
4
screen.
56
THIRD PARTY
: More < : Exit
' buttons to scroll through the Setup
0 mins
: More < : Exit
0 mins
: Confirm < : Cancel
' button. The LCD
5
' to cancel the change.
4
PRINTER
: More < : Exit
THIRD PARTY
: More < : Exit
GSM MODEM
: More < : Exit
'
1
'
2