Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 64

ID50 Series Panel - Installation, Commissioning & Configuration Manual
1
or
2 8
6
997-263-000-11, Issue 11
January 2010
10 Use the ' ' pushbutton, select the remaining four GSM
2
Number entry fields, as required, and repeat steps 4 to 9
above. Once all the required numbers have been entered,
press ' ' to exit. All numbers are saved on exiting.
5
5.5.4.10 Suspend Comms Limit
This function is only selectable if Third Party was selected
at the RS232 Protocol screen. Used to limit the maximum
time for suspending the RS232 Third Party Datalink. Up
to 300 minutes can be set. Alternatively, a value of '0'
can be entered when an indefinite period is required.
1 From the Setup menu screen, press the '
on the numeric keypad to select the RS232
Communications port option. The RS232 Protocol
setup screen is displayed:
[Setup] RS232 Protocol =
> : Change
2 Press the ' /
2
Suspend Comms Limit screen is displayed.
[Setup] Suspend Comms Limit =
> : Change
3 Press the ' ' button if the limit is to be changed.
6
[Setup] Suspend Comms Limit =
Enter new value 60
4 Using the numeric keypad, enter the new value (in
minutes) and confirm using the '
automatically returns to the Suspend Comms Limit
screen. Alternatively, press '
60
THIRD PARTY
: More < : Exit
' buttons to scroll through until the
8
0 mins
: More < : Exit
0 mins
: Confirm < : Cancel
' button. The LCD
5
' to cancel the change.
4
' button
2