Download  Print this page

Transient Protection - Honeywell NOTIFIER ID2000 Series Installation & Commissioning Manual

Hide thumbs


997-433-000-5, Issue 5
May 2010
ID2000 Series Installation & Commissioning Manual
f) DO NOT site the panel where there would be

2.3 Transient Protection

This equipment contains transient-protection devices.
Although no system is completely immune from lightning
transients and interference, for these devices to function
correctly, and to reduce susceptibility, this equipment
must be earthed correctly.
As with all solid state devices, this system may operate
erratically or can be damaged if subjected to lightning-
induced transients.
The use of overhead or outside aerial wiring is not
recommended due to the increased susceptibility to
nearby lightning strikes.
restricted access to the internal equipment and
cabling/wiring connections.



  Also See for Honeywell NOTIFIER ID2000 Series

This manual is also suitable for:

Notifier id2002