Configuration; Introduction; Navigation And Number Entry; Level 2 Configuration Options - Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual

ID50 Series Panel - Installation, Commissioning & Configuration Manual
5

Configuration

5.1 Introduction

The following sections contain instructions to configure
a panel.
For each configuration option, a brief description of its
purpose is given, followed by the configuration procedure
accompanied by illustrations of appropriate LCD displays.
The panels use menu-driven software which is divided
into Level 2 Configuration Options (see Section 5.3) and
Level 3 Configuration Options (see Sections 5.4 - 5.11).

5.2 Navigation and Number Entry

To navigate around the menus and enter numeric values,
refer to the ID50 Series Operating Manual 997-264-000-X,
Section 4.6.

5.3 Level 2 Configuration Options

The Level 2 Configuration Options are described in the
ID50 Series Panel Operating Manual 997-264-000-X.
The applicable sections are listed below:
a. Test
b. Disable/Enable - Section 4.10
c. Clock
d. View Mode
1
e. Commissioning - Section 4.13
f. Print
1 With ID60 panels there is a View Mode menu option
for displaying VIEW, Optiplex and SMART 4 sensor
maintenance log data (Access Level 3 required).
The Operating Manual also includes a Level 2 menu
map.
For the default Level 2 passcode refer to Appendix 1 -
Specifications.
37
- Section 4.9
- Section 4.11
- Section 4.12
- Section 4.14
997-263-000-11, Issue 11
January 2010