Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual page 62

ID50 Series Panel - Installation, Commissioning & Configuration Manual
6
and
2 6
or
2 8
6
997-263-000-11, Issue 11
January 2010
3 If required, press the '
[Setup] Data Link Monitoring =
> : Change
4 Press '
and return to the Peripheral Options menu screen.
5.5.4.9 GSM Communications Module Event Messaging
The ID50/60 Series panels are now able to be configured
for use with a GSM Communications Module (GCM) (panel
software version 5.07, or later). This function is selected
through the RS232 Protocol option screen. The available
options are: changing the GSM PIN number; entry of up
to five GSM network telephone numbers and selecting
panel event categories for text message notification.
1 From the Setup menu screen, press the '
on the numeric keypad to select the RS232
Communications port option. The RS232 Protocol
setup screen is displayed. The PRINTER (default)
option is displayed first. Press the '
to select the GSM MODEM RS232 protocol option:
[Setup]
> : Change
2 Press the '
configuration options for the GSM. The editable
options are: GSM PIN Number (to enable a change
of PIN number) and discrete GSM edit screens which
allow up to 5 GSM network numbers to be configured
to receive event messages from the ID50/60 Series
fire alarm control panels.
[Setup] Change GSM PIN Number:
> : Change
3 To change the GSM PIN number, press the '
pushbutton and the screen asks for the current PIN
to be entered (this is provided with the SIM card):
[Setup]
4 Using the numeric keypad enter the new PIN number
and press '
5
prompted to enter the new PIN number again as
confirmation:
[Setup]
If the GSM PIN number change was successful you
will get the following message:
[Setup]
58
' button to select DISABLED.
6
: More
' to exit the Data Link Monitoring screen
4
RS232 Protocol = GSM MODEM
: More
/ ' pushbuttons to display more
2 8
: More < : Exit
Enter current PIN : _
' when finished. You will now be
5
Confirm new PIN : _
PIN Change complete
DISABLED
< : Exit
' button
2
' pushbutton twice
6
< : Exit
'
6
<: Exit
<: Exit
<: Exit