Evacuation; Silence - Honeywell Notifier ID50 Installation, Commissioning & Configuration Manual

ID50 Series Panel - Installation, Commissioning & Configuration Manual
CBE Rule:01
>:Change :Accept
CBE Rule:01
>:Change
6
CBE Rule:01
>:Change :Accept
CBE Rule:01
>:Change
6
997-263-000-11, Issue 11
January 2010

5.7.3 Evacuation

The Evacuation option has two states, Yes (Y) and No
(N). This option is available with the Fire, Pre-Alarm and
Device Inputs rules. To change the Evacuation setting:
1 Press the '
select the Evacuation option from the menu below.
CBE Rule:01

4:Silence

3
2 Press the '
Refer to Section 5.7, Control-By-Event Output
Rules for further information.
Evacuate = [Y]
< : Cancel
:Accept
3 Confirm the selection by pressing the '
cancel the selection, press '
5
the menu below is re-displayed.
CBE Rule:01
4:Silence
5.7.4 Silence
The Silence option has two states, Yes (Y) and No (N).
This option is available with the Fire, Pre-Alarm and
Device Inputs rules. To change the Silence setting from
the CBE Output Rules menu:
1 Using the numeric keypad, press '
Silence option from the menu below.
CBE Rule:01
4:Silence
4
2 Press the '
Refer to Section 5.7, Control-By-Event Output
Rules for further information.
Silence = [N]
< : Cancel
:Accept
3 Confirm the selection by pressing '
the selection, press '
5
menu below is re-displayed.
CBE Rule:01
4:Silence
86
' button (using the numeric keypad) to
3
1:Type 2:Filter
5:Interrupt
' button to select the required setting.
6
Evacuate = [N]
< : Cancel
4
1:Type 2:Filter
5:Interrupt
1:Type 2:Filter
5:Interrupt
' button to select the required setting.
6
Silence = [Y]
< : Cancel
' button. In either case the
4
1:Type 2:Filter
5:Interrupt
3:Evac
: More
' button. To
5
' button. In either case
3:Evac
: More
' to select the
4
3:Evac
: More
'. To cancel
5
3:Evac
: More