Disassembling The Final Drive Unit Bearings - APRILIA RSV mille Workshop Manual

RSV mille
7.3.15 DISASSEMBLING THE FINAL DRIVE UNIT
BEARINGS
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
N
Remove the final drive unit, see 7.3.2 (REMOVING
THE FINAL DRIVE UNIT).
N
Use a cloth to clean both sides of the hub.
N
Remove the left spacer (1).
N
Remove the seal (2).
N
Remove the snap ring (3).
NOTE
The elastic ring (3) is provided only on the left
side of the final drive unit.
NOTE Have the appropriate special tool m to hand:
– aprilia part# 8140180 (bearing extractors).
N
Use a special extractor to extract the left bearing (4).
N
Retrieve the inner spacer (5).
N
Use a special extractor to extract the right bearing (6).
N
Take the right spacer ring (7).
N
Thoroughly clean the inside of the hub.
NOTE
Wash all the components with a clean deter-
gent.
Release 00/2002-10
CHASSIS
7 - 61
- 00