RSV mille
ã
Follow
N
Check the first five digits of the frame number and
choose the suitable procedure according to the result
of this check.
PROCEDURE FOR THE VEHICLES WHOSE FRAME
BEARS THE ZD4ME CODE
N
For the CO values in the cylinders, adjust:
– the screw (19) for cylinder "1" (front);
– the screw (20) for cylinder "2" (rear);
N
For the vacuum values in the cylinders, adjust:
– the screw (19) (of the throttle body) for cylinder "1"
(front);
– the screw (20) (of the throttle body) for cylinder "2"
(rear);
PROCEDURE FOR THE VEHICLES WHOSE FRAME
BEARS THE ZD4RP CODE
N
For the CO values in the cylinders, adjust:
– the screw (21) (of the central unit) for cylinder "1"
(front);
– the screw (22) (of the central unit) for cylinder "2"
(rear).
N
For the vacuum values in the cylinders, adjust:
– the screw (21) (of the central unit) for cylinder "1"
(front);
– the screw (22) (of the central unit) for cylinder "22"
(rear).
At the end of the cylinder synchronization check or
adjustment:
N ✖
Remove the vacuometer socket (2) and put back the
intake flange (9).
a
CAUTION
✖
It is vital that the vacuometer intake flange (2) be re-
placed with the original intake flange (9).
Release 00/2002-10
FUEL SUPPLY SYSTEM
4
- 29
- 00