RSV mille
6.5.3 CHECKING THE FUEL PUMP RELAY
N
Remove the passenger seat, see 7.1.2 (UNLOCKING/
LOCKING THE PASSENGER SEAT).
In order to check the operation of the relay:
N
Disconnect the four-way connector (1) (coloured white)
from the relay (2).
a
CAUTION
Upon reassembly, make sure that the electric con-
nector (1) is correctly coupled.
N
Power the two internal male terminals "1" – "2" at 12 V .
N
Using a tester (acting as ohmmeter), check for breaks
between the other two terminals "3" – "5".
Correct value with relay powered: 0 Ω.
Correct value with relay not powered:
If the resulting values do not correspond to those in-
dicated, change the relay (2).
6.5.4 CHECKING THE ENGINE SHUTOFF RELAY
The procedure is exactly the same as that used to check
the fuel pump relay, see 6.5.3 (CHECKING THE FUEL
PUMP RELAY).
Release 00/2002-10
∞
Ω.
ELECTRIC SYSTEM
6
- 21
- 00