APRILIA RSV mille Workshop Manual page 327

CHASSIS
ã
Follow
N
Remove the stop ring (16) by means of a cut-tipped
screwdriver.
a
CAUTION
The following operation must be performed with
force, since the slide bushing (17) must push the gas-
ket (18), the ring (19) and the guide bushing (20),
which will all resist the withdrawing action.
N
Withdraw the whole wheel-holder tube (21) from the
slider (22).
a
CAUTION
When withdrawing the slide bushing (17), be careful
not to damage it (especially its sliding surface).
N
With a cut-tipped screwdriver, to enlarge moderately
and withdraw the slide bushing (17) from the tube (21).
N
Withdraw and remove the following components from
the tube (21), in the given order:
– guide bushing (20);
– ring (19);
– gasket (18);
– stop ring (16);
– antidust gasket (15).
7 - 92
- 00
ã
Follow
RSV mille
Release 00/2002-10