Subaru Legacy 2005 Service Manual page 2855

(3) Determine the plays from the following cal-
culation formula. S = 2
(4) Replace with a new one when the play ex-
ceeds specification.
FRONT BALL JOINT
Specification for replacement S:
Less than 0.3 mm (0.012 in)
2) When the play is within specification, visually
check the dust cover.
3) Remove the ball joint and cover, check them for
wear, damage or cracks, and then replace them if
any defective part is found.
4) If the dust cover is damaged, replace with a new
ball joint.
Front Ball Joint
− 2
2 1
FS-17
FRONT SUSPENSION