Subaru Legacy 2005 Service Manual page 2827

B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
⋅
T: 18 N m (1.8 kgf-m, 13.0 ft-lb)
• Clutch pedal catcher
(A)
(B)
T
(A) Bracket (Clutch pedal catcher)
(B) Clutch pedal catcher
(C) Clutch pedal
(D) Steering support beam
CAUTION:
Always use a new clevis pin.
2) Adjust the clutch pedal after installation. <Ref. to
CL-39, ADJUSTMENT, Clutch Pedal.>
C: DISASSEMBLY
1. LHD MODEL
1) Remove the clutch switch.
2) Remove the clips, assist spring, rod and bush-
ing.
(D)
(A)
(E)
(C)
(D)
(B)
(E)
(C)
(A) Clip
(B) Assist spring
(C) Assist rod
(D) Bushing
(E) Clevis pin
Clutch Pedal
(D)
(C)
CL-00275
(D)
CL-00094
3) Remove the spring pin and remove lever.
(A) Pin
(B) Lever
4) Remove the clutch pedal and bushings.
(B)
(A)
(A) Clutch pedal
(B) Bushing
5) Remove the stopper, clip and rod S, and then re-
move the spring and bushing S.
(E)
(D)
(A) Clip (EC model and 2.5 L model)
(B) Bushing S (EC model and 2.5 L model)
(C) Spring S (EC model and 2.5 L model)
(D) Rod S (EC model and 2.5 L model)
(E) Stopper
6) Remove the stopper from clutch pedal.
7) Remove the clutch pedal pad.
CL-37
CLUTCH SYSTEM
(A)
CL-00095
CL-00096
(B)
(A)
(C)
CL-00097
(B)
(B)