Subaru Legacy 2005 Service Manual page 2819

C: DISASSEMBLY
1. 5MT NON-TURBO MODEL
1) Remove the straight pin and reservoir tank.
(A)
(A) Reservoir tank
(B) Straight pin
2) Remove the oil seal.
(A)
(B)
(A) Oil seal
(B) Master cylinder
3) Move the cylinder boot backward.
(B)
(A) Cylinder boot
(B) Master cylinder
4) Remove the snap ring.
CAUTION:
Be careful to prevent the rod, washer, piston
and return spring from flying out when remov-
ing snap ring.
Master Cylinder
(B)
CL-00178
CL-00179
(A)
CL-00048
2. 5MT TURBO MODEL AND 6MT MODEL
1) Remove the straight pin and reservoir tank.
(A)
(A) Reservoir tank
(B) Straight pin
2) Remove the oil seal.
(A) Oil seal
(B) Master cylinder
3) Move the cylinder boot backward.
(B)
(A) Cylinder boot
(B) Master cylinder
4) Remove the snap ring.
CAUTION:
Be careful to prevent the rod, washer, piston
and return spring from flying out when remov-
ing snap ring.
5) Remove the clutch damper.
CL-29
CLUTCH SYSTEM
(B)
CL-00046
(A)
(B)
CL-00047
(A)
CL-00048