Subaru Legacy 2005 Service Manual page 2809

4) Deflection on facing
If the deflection at the outer circumference of facing
exceeds the specified value, replace the clutch
disc.
ST 499747100 CLUTCH DISC GUIDE
Limit for deflection:
1.0 mm (0.039 in) at R = 110 mm (4.33 in)
• 5MT EC, EK and KA model
ST
• 5MT KS, K4, turbo model and 6MT model
S T
5) If there is worn spline, loose rivet or faulty damp-
er spring, replace the clutch disc.
• 5MT EC, EK and KA model
(A) Spline
(B) Rivet
Clutch Disc and Cover
• 5MT KS, K4 model and 6MT model
• 5MT turbo model
CL-00118
CL-00016
2. CLUTCH COVER
NOTE:
Visually check the following items without disas-
( A )
sembling, and replace or repair if defective.
1) Loose thrust rivet
2) Damaged or worn bearing contact area at the
center of diaphragm spring
• 5MT EC, EK and KA model
( B )
CL-00119
CL-19
(A) Spline
(B) Rivet
(C) Damper spring
(B)
(A) Spline
(B) Rivet
(C) Damper spring
(A) Thrust rivet
(B) Diaphragm spring
CLUTCH SYSTEM
CL-00017
(C)
(A)
CL-00389
( A )
( B )
CL-00120