Supplementary Conditions; Data Lists; Machine Data; General Machine Data - Siemens SINUMERIK Series Function Manual

8.5

Supplementary Conditions

Availability of function "Software cams, position switching signals"
The function is an option ("position-switching signals/cam controller"), which must be
assigned to the hardware through the license management.
8.6

Data lists

8.6.1

Machine data

8.6.1.1

General machine data

Number Identifier: $MN_
10260 CONVERT_SCALING_SYSTEM
10270 POS_TAB_SCALING_SYSTEM
10450 SW_CAM_ASSIGN_TAB[n]
10460 SW_CAM_MINUS_LEAD_TIME[n]
10461 SW_CAM_PLUS_LEAD_TIME[n]
10470 SW_CAM_ASSIGN_FASTOUT_1
10471 SW_CAM_ASSIGN_FASTOUT_2
10472 SW_CAM_ASSIGN_FASTOUT_3
10473 SW_CAM_ASSIGN_FASTOUT_4
10480 SW_CAM_TIMER_FASTOUT_MASK
10485 SW_CAM_MODE
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
N3: Software cams, position switching cycles - only 840D sl
Description
Basic system switchover active
System of measurement of position tables
Assignment of software cams to machine axes
Lead or delay time on minus cams 1 -16
Lead or delay time on plus cams 1 -16
Hardware assignment for output of cams
1 -8 to NCK I/Os
Hardware assignment for output of cams
9 -16 to NCK I/Os
Hardware assignment for output of cams
17 -24 to NCK I/Os
Hardware assignment for output of cams
25 -32 to NCK I/Os
Screen form for output of cam signals via timer
interrupts to NCU
Response of SW cams
8.5 Supplementary Conditions
553