Siemens SINUMERIK Series Function Manual page 437

Number Identifier: $MC_
24434 TRAFO_GEOAX_ASSIGN_TAB_5
24436 TRAFO_INCLUDES_TOOL_5
24440 TRAFO_TYPE_6
24442 TRAFO_AXES_IN_6
24444 TRAFO_GEOAX_ASSIGN_TAB_6
24446 TRAFO_INCLUDES_TOOL_6
24450 TRAFO_TYPE_7
24452 TRAFO_AXES_IN_7
24454 TRAFO_GEOAX_ASSIGN_TAB_7
24456 TRAFO_INCLUDES_TOOL_7
24460 TRAFO_TYPE_8
24462 TRAFO_AXES_IN_8
24464 TRAFO_GEOAX_ASSIGN_TAB_8
24466 TRAFO_INCLUDES_TOOL_8
24470 TRAFO_TYPE_9
24472 TRAFO_AXES_IN_9
24474 TRAFO_GEOAX_ASSIGN_TAB_9
24476 TRAFO_INCLUDES_TOOL_9
24480 TRAFO_TYPE_10
24482 TRAFO_AXES_IN_10
24484 TRAFO_GEOAX_ASSIGN_TAB_10
24486 TRAFO_INCLUDES_TOOL_10
24800 TRACYL_ROT_AX_OFFSET_1
24808 TRACYL_DEFAULT_MODE_1
24810 TRACYL_ROT_SIGN_IS_PLUS_1
24820 TRACYL_BASE_TOOL_1
24850 TRACYL_ROT_AX_OFFSET_2
24858 TRACYL_DEFAULT_MODE_2
24860 TRACYL_ROT_SIGN_IS_PLUS_2
24870 TRACYL_BASE_TOOL_2
22534 TRAFO_CHANGE_M_CODE
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Description
Geo-axis assignment for 5th transformation
Tool handling with active transformation 5.
Definition of the 6th transformation in channel
Axis assignment for the 6th transformation
Assignment geometry axes for 6th transformation
Tool handling with active transformation 6.
Definition of the 7th transformation in channel
Axis assignment for the 7th transformation
Geo-axis assignment for 7th transformation
Tool handling with active transformation 7.
Definition of the 8th transformation in channel
Axis assignment for the 8th transformation
Geo-axis assignment for 8th transformation
Tool handling with active transformation 8.
Definition of the 9th transformation in channel
Axis assignment for the 9th transformation
Geo-axis assignment for 9th transformation
Tool handling with active transformation 9.
Definition of the 10th transformation in channel
Axis assignment for the 10th transformation
Geo-axis assignment for 10th transformation
Tool handling with active transformation 10.
Deviation of rotary axis from zero position in degrees (1st
TRACYL)
Selection of TRACYL mode (1st TRACYL)
Sign of rotary axis for TRACYL (1st TRACYL)
Distance of tool zero point from origin of geo-axes (1st
TRACYL)
Deviation of rotary axis from zero position in degrees (2nd
TRACYL)
Selection of TRACYL mode (2nd TRACYL)
Sign of rotary axis for TRACYL (2nd TRACYL)
Distance of tool zero point from origin of geo-axes (2nd
TRACYL)
M code for transformation changeover
M1: Kinematic transformation
6.11 Data lists
437