18.5
Mode Groups, Channels, Axis Replacement (K5)
18.5.1
Signals to axis/spindle (DB31, ...)
DB31, ...
DBB8
Axis/spindle replacement
Edge evaluation: Yes
Signal state 1 or
The current axis type and currently active channel for this axis must be specified.
edge change 0 → 1
With axis replacement by the PLC, the bit meanings of the signal to axis/spindle DB31, ... DBB8:
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Bit 4:
Bit 5:
Bit 6:
Bit 7:
Signal state 0 or
edge change 1 → 0
Corresponding to ....
DB31, ... DBB68 (Axis/spindle replacement)
MD20070 $MC_AXCONF_ASSIGN_MASTER_USED
(Machine axis number valid in channel)
MD30550 $MA_AXCONF_ASSIGN_MASTER_CHAN
(Initial setting of channel for axis replacement)
Special cases, errors,
...
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Signal(s) updated: Cyclic
Assign A NC axis/spindle channel
B ...
C ....
Assign D NC axis/spindle channel
Activation, assignment by means of a positive edge
-
-
Request PLC axis/spindle
18.5 Mode Groups, Channels, Axis Replacement (K5)
Z2: NC/PLC interface signals
885