Replacement Behavior Nc Program - Siemens SINUMERIK Series Function Manual

K5: Mode groups, channels, axis interchange
5.4 Axis/spindle replacement
● Geometry axis with rotated frame and axis replacement in JOG mode via machine data
● Axis replacement via synchronized actions GET(axis), RELEASE(axis), AXTOCHAN,
5.4.4

Replacement behavior NC program

Possible transitions
The following diagram shows which axis replacement possibilities are available.
Figure 5-5
324
MD32074 $MA_FRAME_OR_CORRPOS_NOTALLOWED can be activated.
$AA_AXCHANGE_TYP(axis).
Transitions of possible axis states during axis replacement
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions