Deactivation; Boundary Conditions - Siemens SINUMERIK Series Function Manual

M1: Kinematic transformation
6.3 TRACYL cylinder surface transformation (option)
Meaning
TRACYL(<d>)
TRACYL(<d>, <n>)
<d>
<n>
<k>
6.3.4

Deactivation

A TRACYL transformation active in the channel is switched-off with:
● Deactivate transformation:
● Activate another transformation, e.g.
6.3.5

Boundary conditions

Selection/deselection
● An intermediate motion block is not inserted (phases/radii).
● A series of spline blocks must be concluded.
● Tool radius compensation must be deselected.
● The frame which was active prior to
● An active working area limit is deselected for axes affected by the transformation (analog
● Continuous path control and rounding are interrupted.
● DRF offsets must have been deleted by the operator.
● The Y axis used for the compensation should be set to zero for selection and active
Tool change
Tools can be changed only when the tool radius compensation function is deselected.
376
:
:
:
:
:
).
G500
).
WALIMOF
groove side compensation.
Activate TRACYL with TRACYL data set 1 and working diameter d
Activate TRACYL with TRACYL data set n and working diameter d
Reference or working diameter.
Range of values:
TRACYL data set number (optional)
Range of values:
The parameter is only relevant for transformation type 514 (optional).
k = 0: without groove side correction
•
k = 1: with groove side correction
•
If the parameter is not specified, then the parameterized basic position
applies: $MC_TRACYL_DEFAULT_MODE_<n>
TRAFOOF
,
TRAANG TRANSMIT
is deselected by the control system (analog
TRACYL
>1
1, 2
,
TRAORI
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions